Pexa

Oils & Greases

TURBONYCOIL

Turbine Oils

Power Plant, APU, Starter, IDG, Accessories

NYCO offers a wide range of aviation turbine oils for power plant, APU, starter, propeller, IDG and accessories for aircraft and helicopters.

TURBONYCOIL includes high performance synthetic aviation turbine oils (TURBONYCOIL 600, 640, 160) and one mineral preservation oil (TURBONYCOIL 3516)

NYCO’s turbine oils are:

  • Recognized for their superior quality
  • Qualified by OEMs and engine manufacturers
  • At the most competitive price
  • Obtainable worldwide, anytime, anywhere

With NYCO GREASE our customers choose high performance lubrication, simplified inventory and maintenance and cost reduction.

High Performance Turbine Oils

TURBONYCOIL 600, 640, 3516 and 160 are synthetic and mineral oils, fortified with carefully selected anti-oxidant, anti-wear, anti-corrosion and extreme-pressure additives.

TURBONYCOIL 640 (SAE-AS 5780 HPC)

The high temperature oil, lubricating oil with a viscosity of 5 cSt at 100ºC based on neopolyol esters with high thermal stability.

Tailor-made to address requirements regarding:

  • Low coking propensity
  • High resistance to oxidisation and thermal degradation
  • High conductivity

Recommended for use in hit running engine designs where evidence of oil coking and/or oil degradation.

Approval MIL-PRF-23699 G class HTS pending.

TURBONYCOIL 3516 (AIR 3516/A)

The engine preservation oil used by major MROs at the end of maintenance tasks or during aircraft storage.

As it retains low viscosity at very low temperature (down to -60ºC) it is an efficient oil for cold parts of A/C engines and airframes.

Can also be used as a multi-purpose lubricant for many aircraft parts.

TURBONYCOIL 160 (MIL-PRF-7808 L)

The low temperatire oil, perfect for operation in cold weather or switch on inflight (accessories and APU).

A 3 cSt oil and 100ºC that retains fluidity at very low temperatures (down to -54ºC).

A reference for Tail Horizontal Stabiliser (THS).

TURBONYCOIL 600 (SAE-AS 5780 SPC, MIL-PRF-23699 G STD)

TURBONYCOIL 600 is a standard lubricating oil with a viscosity of 5 cSt at 100ºC based on high thermal stable polyol esters.

TURBONYCOIL 600 features:

  • Much lower volatility at high temperatures
  • Higher flash point
  • Excellent resistance to foaming
  • Superior lubricity

Approved by all major engine manufacturers (General Electric, Pratt and Whitney Canada, Allison, Rolls-Roycem Snecma, Klimoc, Turbomeca and CFMI among others.

TURBONYCOIL 600 has logged over 30 million hours of operation since 1985.

Approved Specifications (Synthetic):

TURBONYCOIL U.S
SPECIFICATION
U.K
SPECIFICATION
NATO
CODE
INTERNATIONAL
600 MIL-PRF-23699 G
class STD
DEF STAN 91-101
Iss. 3
O-156 DCSEA 299/A
SEA-AS 5780 HPC
640 MIL-PRF-23699 G
class HTS
BMS 3-32 A
Type II
O-154  SAE-AS 5780 HPC
160  MIL-PRF-6081 D
Gr. 1010
BMS 3-32 A
Type I
O-133

Approved Specifications (Mineral):

TURBONYCOIL U.S
SPECIFICATION
U.K
SPECIFICATION
NATO CODE INTERNATIONAL
3516 MIL-PRF-6081 D
Gr. 1010
O-133  AIR 3516/A
Iss. 2

HYDRAUNYCOIL

Shock Stut Fluids

For Landing Gear Absorbers

NYCO offers a complete range of shock absorber fluids for landing gear used on all types of aircraft.

HYDRAUNYCOIL includes high performance mineral (FH 51, FH 5 AW, FH 6 AW) and synthetic (FH 42) shock strut fluids.

HYDRAUNYCOIL is the factory fill for SAFRAN, Messier-Bugatti-Dowty.

NYCO’s hydraulic fluids are:

  • Qualified by all air framers and OEMs
  • Available on all AMMs
  • Intermixable and miscible
  • Purchasable in a wide range of packaging
  • Obtainable worldwide, anytime, anywhere

Major international airlines choose NYCO’s FH 5 AW and FH 6 AW to be the sole shock strut fluid on their whole fleet (Airbus and Boeing…). The best solution for landing gears!

HYDRAUNYCOIL FH 51 (MIL-PRF-5606 H)

The original NYCO hydraulic fluid used on all types of aircraft. A reliable and economic solution.

Used as shock strut fluid for many commercial aircraft landing gears (Airbus ATR, Bombardier, Fokker, Embraer etc).

FH 51 has been used for more than 5 years on Dasault Aviation Mirrage III and IV equipped with Messier-Hispano-Bugatti landing gears.

HYDRAUNYCOIL FH 5 AW (BMS 3-32 A Type II)

All the qualities of FH 51 + a specific additive package to improve the fluid lubricity, an outstanding friction coefficient and extreme-pressuire efficient properties in operation.

As it retains fluidity down to -54°C, it is an efficient shock absorber during landing, even after prolonged high altitude cruise. Intended for use in landing gears of Boeing and Airbus aircraft.

HYDRAUNYCOIL FH 6 AW (BMS 3-32 A Type I)

FH 5 AW + great anti-corrosion properties for landing gears after overhaul or under storage. Used as a preservative or in operation.

The best multi purpose solution for Boeing and Airbus fleet.

HYDRAUNYCOIL FH 42 (MIL-PRF-87257 B)

The synthetic shock strut fluid for new generation aircraft.

Synthetic hydraulic fluid based on PAO and esters with a viscosity of 7cSt at 40°C. Designed to operate in the temperature range -54°C to +200°C for a long period of time without significant evaporation or change in viscosity.

Hydraunycoil FH 42:

  • Better and improved fire resistance
  • Outstanding fluidity at very low temperatures
  • Excellent resistance to shearing
  • Efficient prevention against component wear and seizure over a large temperature range

Applied in hydraulic systems previously operated with H-515 (MIL-PRF-5606) fluids without change of the elastomeric seals.

Approved Specifications (Mineral):

HYDRAUNYCOIL U.S SPECIFICATION BOEING NATO CODE OTHERS
FH 51 MIL-PRF-5606H H-515 DCSEA 415/A
DEF-STAN 91-48
FH 5 AW BMS 3-32 A
Type II
FH 6 AW BMS 3-32 A
Type I

Approved Specifications (Synthetic):

HYDRAUNYCOIL U.S SPECIFICATION BOEING NATO CODE OTHERS
FH 42 MIL-PRF-87257B H-538

NYCO GREASE

Multi Purpose Greasing Solutions

Airframe, Landing Gear, Wheels, Instruments

NYCO offers an all-inclusive-package of lubricating solutions for all types of aircraft. Proven performance, economy and reliability.

NYCO offers a complete range of greasing solutions for airframe (doors, flaps, slaps…), landing gear, wheels and instruments used on all types of aircraft.

NYCO GREASE includes high performance greases based on synthetic hydrocarbons and synthetic esters.

NYCO’s greases are:

  • Qualified by all air framers
  • General and multi-purpose
  • At the most competitive price
  • Purchasable in a wide range of packaging
  • Obtainable worldwide, anytime, anywhere

With NYCO GREASE our customers choose high performance lubrication, simplified inventory and maintenance and cost reduction.

High Performance Synthetic Greases

NYCO’s flagship greases, NYCO GREASE GN 148, GN 25013 and GN 3058, are synthetic NLGI 2 Grade greases fortified with anti-corrosion, antioxidant, anti-wear and extreme pressure additives.

NYCO GREASE GN 25013 (MIL-G-25013 E)

The extreme temperature range silicon multi-purpose grease for airframe, ball and roller bearings with low torque, actuators and helicopter systems.

Based on high performance silicone oil thickened with polytetrafluoroethylene, the best solution for very low and extremely high temperatures: -73° to +232°C.

Compatible with most elastomers commonly used, including EPDM.

Its very low resisting torque makes NYCO GREASE GN 25013 the best choice for parts actuated by low-power motors.

Approved by air framers and OEMs (Airbus Goodrich, Safran…) and recommended by Airbus.

NYCO GREASE GN 3058 (AIMS 09-06-003)

The wide temperature range synthetic grease for wheel bearings, landing gear, high load and helicopter systems at high temperatures.

A lithium complex soap thickened synthetic grease demonstrating high load carrying capability and good resistance to water wash out and offering a very good protection from corrosion even in presence of salt water.

Made to operate in salty and humid environments at a temperature range of -54° to +175°C.

NYCO GREASE GN 148

The new BMS 3-33B grease, setting new standards.

The multi-purpose synthetic grease for airframe, landing gear, actuators, slaps, flaps, doors, THS and helicopter systems.

NYCO GREASE GN 148:

  • Excellent protection against warm rust and corrosion
  • Long durability
  • Extremely low temperature range (-73° to +121°C)
  • Outstanding load carrying capacity
  • High water wash-out
  • Efficient lubrication of bearing subjected to vibrations
  • Suitable for high to very high speed bearings

Ready for use on all types of aircraft. Approved by Airbus, Boeing; meets SAE and U.S military requirements.

Succeeds to NYCO GREASE GN 10, GN 15, GN 46 and GN 144.

Virtually replaces MIL-PRF-23827, DCSEA 354/A, DEF STAN 91-53, BMS-3-24, MIL-PRF-24139A, DCSEA 382 and DEF STAN 91-12 greases

Approvals:

NYCO GREASE U.S
SPECIFICATION
BOEING AIRBUS INTERNATIONAL
SPECIFICATIONS
GN 25013 MIL-PRF-25013E
GN 3058 AIMS09-06-003 SAE-AMS-3058
GN 148 MIL-PRF-23827C BMS 3-33B AMS09-06-002 SAE-AMS-3052