Power Plant, APU, Starter, IDG, Accessories
NYCO offers a wide range of aviation turbine oils for power plant, APU, starter, propeller, IDG and accessories for aircraft and helicopters.
TURBONYCOIL includes high performance synthetic aviation turbine oils (TURBONYCOIL 600, 640, 160) and one mineral preservation oil (TURBONYCOIL 3516)
NYCO’s turbine oils are:
- Recognized for their superior quality
- Qualified by OEMs and engine manufacturers
- At the most competitive price
- Obtainable worldwide, anytime, anywhere
With NYCO GREASE our customers choose high performance lubrication, simplified inventory and maintenance and cost reduction.
High Performance Turbine Oils
TURBONYCOIL 600, 640, 3516 and 160 are synthetic and mineral oils, fortified with carefully selected anti-oxidant, anti-wear, anti-corrosion and extreme-pressure additives.
TURBONYCOIL 640 (SAE-AS 5780 HPC)
The high temperature oil, lubricating oil with a viscosity of 5 cSt at 100ºC based on neopolyol esters with high thermal stability.
Tailor-made to address requirements regarding:
- Low coking propensity
- High resistance to oxidisation and thermal degradation
- High conductivity
Recommended for use in hit running engine designs where evidence of oil coking and/or oil degradation.
Approval MIL-PRF-23699 G class HTS pending.
TURBONYCOIL 3516 (AIR 3516/A)
The engine preservation oil used by major MROs at the end of maintenance tasks or during aircraft storage.
As it retains low viscosity at very low temperature (down to -60ºC) it is an efficient oil for cold parts of A/C engines and airframes.
Can also be used as a multi-purpose lubricant for many aircraft parts.
TURBONYCOIL 160 (MIL-PRF-7808 L)
The low temperatire oil, perfect for operation in cold weather or switch on inflight (accessories and APU).
A 3 cSt oil and 100ºC that retains fluidity at very low temperatures (down to -54ºC).
A reference for Tail Horizontal Stabiliser (THS).
TURBONYCOIL 600 (SAE-AS 5780 SPC, MIL-PRF-23699 G STD)
TURBONYCOIL 600 is a standard lubricating oil with a viscosity of 5 cSt at 100ºC based on high thermal stable polyol esters.
TURBONYCOIL 600 features:
- Much lower volatility at high temperatures
- Higher flash point
- Excellent resistance to foaming
- Superior lubricity
Approved by all major engine manufacturers (General Electric, Pratt and Whitney Canada, Allison, Rolls-Roycem Snecma, Klimoc, Turbomeca and CFMI among others.
TURBONYCOIL 600 has logged over 30 million hours of operation since 1985.
Approved Specifications (Synthetic):
|DEF STAN 91-101
SEA-AS 5780 HPC
|BMS 3-32 A
|O-154||SAE-AS 5780 HPC|
|160|| MIL-PRF-6081 D
|BMS 3-32 A
Approved Specifications (Mineral):
|O-133|| AIR 3516/A